- enbrighten 70512 USB-Powered LED String Lights
- INSTALLATION
- OPERATION
- TROUBLESHOOTING
- FCC
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
enbrighten 70512 USB-Powered LED String Lights
Thank you for your purchase!
Instructions made easy
Read instructions or watch easy-to-follow video. Scan code orvisitbyjasco.com/70512i
Register your product
Receive exclusive deals and register your product. Scan code or visitbyjasco.com/deals
Discover innovative lighting solutions atenbrightenme.com.
Like our product? Leave a review on your favorite retailer website oramazon.com.
Having Problems? Let us know how we can help. Call 1-800-654-8483between 7AM-8PM, M-F, Central Time.
INSTALLATION
STEP 1: INSTALL STRING LIGHT
Carefully untie the string light and hang, wrap or place it in your preferredindoor or covered outdoor location. Ensure the 13ft. USB power cord is withinreach of a power source.
STEP 2: UNTIE POWER CORD
Carefully untie and straighten out the USB power cord.
STEP 3: PLUG INTO USB-A PORT
Plug the USB power cord into a 5V, 1A minimum USB-A port or adapter (notincluded).
STEP 4: PREPARE REMOTE
Remove the plastic tab from the remote’s battery compartment (CR2025 batteryis preinstalled).
OPERATION
- ON/OFF BUTTONS: ON/OFF
- DIM BUTTONS: Increase/decrease brightness (4x)
- COLOR BUTTONS: Choose from 16 solid colors
HOLIDAY BUTTON:
- July 4th
- Holiday
- Mardi Gras
- Valentine’s Day
- Autumn
- Spring
- St. Patrick’s Day
MODE BUTTON:
- Pulse
- Flash
- Strobe
- Fade
NIGHT MODE BUTTON:
- Solid amber
- Pulse amber
- SPEED BUTTONS : Increase/decrease speed (4x)
- 3H/6H BUTTONS: Light turns off after three or six hours — lights will flash once to confirm timer is active.
- DAILY BUTTON: Light stays on for eight hours, turns off for 16 hours — lights will flash once to confirm timer is active.
- TIMER OFF BUTTON: Deactivates 3H, 6H or Daily — lights will flash twice to confirm timer cancellation.
NOTE : Point the remote directly at the USB controller to avoid extra IRinterference.
TROUBLESHOOTING
| Problem | Possible Cause | Solution |
|---|
Light doesn’t work
| Won’t turn on|
Incorrect USB power| USB power supply must be 5V @ 1A minimum for properoperation. Excessive voltage may lead to product damage.
Remote doesn’t work| Remote battery| Replace CR2025 battery noting polarity.Reference diagram on back of remote.
Contact our U.S.-based Consumer Care at
1-800-654-8483 between 7AM-8PM, M-F, Central Time
WARNING
- RISK OF ELECTRIC SHOCK
- RECEPTACLE OUTLETS USED FOR POWERING CURTAIN LIGHTS SHALL COMPLY WITH ALL NATIONAL AND LOCAL ELECTRICAL CODES. CONSULT LOCAL ELECTRICIAN IF UNSURE OF COMPLIANCE REQUIREMENTS.
- DO NOT SUBMERSE.
- DO NOT USE AROUND AQUARIUMS.
- DO NOT USE IN WET LOCATIONS.
- DO NOT INSTALL IN LOCATIONS WHERE CURTAIN LIGHTS CAN BE STEPPED ON.
- ENSURE CURTAIN LIGHTS ARE UNPLUGGED FROM POWER DURING INSTALLATION.
- CURTAIN LIGHTS SHOULD BE INSTALLED OUT OF CHILDREN’S REACH. DO NOT ALLOW CHILDREN TO PLAY WITH THEM.
- RISK OF FIRE
- NOT INTENDED FOR USE NEAR OPEN FLAMES OR ABOVE STOVES, COOK TOPS, SINKS OR OTHER HEAT PRODUCING APPLIANCES, SUCH AS COFFEE MAKERS, TOASTERS OR TOASTER OVENS.
- USE INDOORS OR IN PROTECTED OUTDOOR LOCATIONS ONLY.
Suppliers Declaration of Conformity | Model # 70512 |
Jasco Products Co., 10 E. Memorial Rd., Oklahoma City, OK 73114,www.byjasco.com.
This device complies with Part 15 of the FCC and Industry Canada licenseexempt RSS standards. Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and (2) this device mustaccept any interference received, including interference that may causeundesired operation.
FCC
FCC NOTE: The manufacturer is not responsible for any radio or TVinterference caused by unauthorized modifications to this equipment. Suchmodifications could void the user’s authority to operate the equipment.
NOTE : This equipment has been tested and found to comply with the limitsfor a Class B digital device, pursuant to Part 15 of the FCC Rules. Theselimits are designed to provide reasonable protection against harmfulinterference in a residential installation. This equipment generates, uses andcan radiate radio frequency energy, and if not installed and used inaccordance with the instructions, may cause harmful interference to radiocommunications. However, there is no guarantee interference will not occur ina particular installation. If this equipment does cause harmful interferenceto radio or television reception, which can be determined by turning theequipment off and on, the user is encouraged to try to correct theinterference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. CAN ICES-3(B)/NMB-3(B)
MADE IN CAMBODIA
Distributed by Jasco Products Company LLC,
10 E. Memorial Rd., Oklahoma City, OK 73114.
This Jasco product comes with a 1-year limited warranty. Visitwww.byjasco.comfor warranty details.
Questions? Contact our U.S.-based Consumer Care at 1-800-654-8483 between 7AM-8PM, M-F, Central Time.
References
Read User Manual Online (PDF format)
Loading......
