Eurotherm ULTRA SLIMPAK AC Input Field Configurable Isolator, 4 to 20 mA, 0 to 500 V AC (2024)

Eurotherm ULTRA SLIMPAK AC Input Field Configurable Isolator, 4 to 20 mA, 0 to 500 V AC (1)

Downloads: datasheet

More Eurotherm Products

Ask an Expert

Configurable for an input range of 0 to 500 mV AC, this AC input field configurable isolator provides an isolated DC output in proportion to an AC input. In addition, this isolator features an ultra-slim housing and a flexible power supply.

Configurable for an input range of 0 to 500 mV AC, this AC input field configurable isolator provides an isolated DC output in proportion to an AC input. In addition, this isolator features an ultra-slim housing and a flexible power supply.

  • Description
  • Specifications
  • Included
  • Resources
  • Forum
  • Customer Reviews

Eurotherm G468-0001.V1 Offers

Ideal for high-density installations, this AC input field configurable isolator features a wide ranging zero and span adjustability.

Features

  • Field configurable input range: 0 to 500 mV AC
  • Eliminates ground loops
  • Field configurable outputs: 4 to 20 mA
  • Ultra slim housing for high density installations
  • Flexible power supply accepts 9 to 30 V DC
  • ASIC technology for enhanced reliability
  • RoHS compliant

Diagnostic LED

This unit is equipped with a dual function LED signal monitor. The green, front mounted LED indicates both DC power and input signal status. Active DC power is indicated by an illuminated LED. If the input signal is more than 110% of the full scale range, the LED will flash at 8 Hz. Below -10%, the flash rate is 4 Hz.

Applications

  • High density installations
  • Energy management
  • Load shedding
  • Motor current/load monitoring
  • Locked rotor detection
  • Isolation and data acquisition
  • I/O signal conditioning

Eurotherm G468-0001.V1 Specifications

Input Voltage:
Ranges: 100 mV to 250 V AC
Impedance: >100 KΩ
Overvoltage: 300 V AC

Current:
Ranges: 10 mA to 100 mA AC
Impedance: 20 Ω, typical
Overcurrent: 200 mAAC
Overvoltage: 60 V peak
Frequency range: DC or 40 to 400 Hz AC, factory calibrated at 60 Hz
Common mode (input to ground): 1800 V DC, maximum

Zero and span range:
Zero turn-up: 50% of full scale range
Span turn-down: 50% of full scale range
Output Voltage:
Output: 0 to 5 V, 0 to 10 V
Source impedance: <10 &ohm;
Drive: 10 mA, maximum (1 K&ohm;, minimum at 10 V)

Current:
Output: 4 to 20 mA
Source impedance: >100 K&ohm;

Compliance: 12 V, maximum (600 &ohm;, maximum)
Accuracy (Including Linearity, Hysteresis) ±0.1% of span, typical
±0.5% of span, maximum
Stability ±0.025%/°C of selected input span, typical
Response Time (10 to 90%) 250 mSec, typical
Common Mode Rejection DC to 60 Hz: 120 dB
Isolation 1800 V DC between input, output and power
LED Indication (Green) 8 Hz flash when input is 110% of full scale range
4 Hz flash when input is 10% below full scale range
Humidity (Non-Condensing) Operating: 15 to 95% at 113°F (45°C)
Soak: 90% for 24 hours at 149°F (65°C)
Temperature Range Operating: 32 to 131°F (0 to 55°C)
Storage: -13 to 158°F (-25 to 70°C)
Wire Terminations Screw terminals for 12 to 22 AWG
EMC Compliance (CE Mark) Emmissions: EN50081-1
Immunity: EN50082-2
Safety: EN50178
Agency Approvals UL recognized per standard UL508 (File No.E99775)
CE compliance per EMC directive 89/336/EEC and low voltage 73/23/EEC
RoHS Compliant
Power Consumption: 1.5 W typical, 2.5 W maximum
Range: 9 to 30 V DC
Dimensions 3.54 x 4.34 x 0.5" (90 x 110.2 x 12.6 mm)
Weight 0.48 lbs (0.21 kg)

Click here for complete specifications on the Eurotherm G468-0001.V1

What's included with the Eurotherm G468-0001.V1

  • Eurotherm ULTRA SLIMPAK AC Input Field Configurable Isolator, 4 to 20 mA, 0 to 500 V AC

datasheet for the Eurotherm ULTRA SLIMPAK AC Input Field Configurable Isolator, 4 to 20 mA, 0 to 500 V AC

Ask a question about Eurotherm ULTRA SLIMPAK AC Input Field Configurable Isolator, 4 to 20 mA, 0 to 500 V AC

Customer Reviews for the Eurotherm G468-0001.V1

See Also
Eurotherm ULTRA SLIMPAK AC Input Field Configurable Isolator, 4 to 20 mA, 0 to 500 V AC
  • Description ➕➖

    • Eurotherm G468-0001.V1 Offers

    Ideal for high-density installations, this AC input field configurable isolator features a wide ranging zero and span adjustability.

    Features

    • Field configurable input range: 0 to 500 mV AC
    • Eliminates ground loops
    • Field configurable outputs: 4 to 20 mA
    • Ultra slim housing for high density installations
    • Flexible power supply accepts 9 to 30 V DC
    • ASIC technology for enhanced reliability
    • RoHS compliant

    Diagnostic LED

    This unit is equipped with a dual function LED signal monitor. The green, front mounted LED indicates both DC power and input signal status. Active DC power is indicated by an illuminated LED. If the input signal is more than 110% of the full scale range, the LED will flash at 8 Hz. Below -10%, the flash rate is 4 Hz.

    Applications

    • High density installations
    • Energy management
    • Load shedding
    • Motor current/load monitoring
    • Locked rotor detection
    • Isolation and data acquisition
    • I/O signal conditioning

    Show More...

  • Specifications ➕➖

    • Eurotherm G468-0001.V1 Specifications

    Input Voltage:
    Ranges: 100 mV to 250 V AC
    Impedance: >100 K&ohm;
    Overvoltage: 300 V AC

    Current:
    Ranges: 10 mA to 100 mA AC
    Impedance: 20 &ohm;, typical
    Overcurrent: 200 mAAC
    Overvoltage: 60 V peak
    Frequency range: DC or 40 to 400 Hz AC, factory calibrated at 60 Hz
    Common mode (input to ground): 1800 V DC, maximum

    Zero and span range:
    Zero turn-up: 50% of full scale range
    Span turn-down: 50% of full scale range
    Output Voltage:
    Output: 0 to 5 V, 0 to 10 V
    Source impedance: <10 &ohm;
    Drive: 10 mA, maximum (1 K&ohm;, minimum at 10 V)

    Current:
    Output: 4 to 20 mA
    Source impedance: >100 K&ohm;

    Compliance: 12 V, maximum (600 &ohm;, maximum)
    Accuracy (Including Linearity, Hysteresis) ±0.1% of span, typical
    ±0.5% of span, maximum
    Stability ±0.025%/°C of selected input span, typical
    Response Time (10 to 90%) 250 mSec, typical
    Common Mode Rejection DC to 60 Hz: 120 dB
    Isolation 1800 V DC between input, output and power
    LED Indication (Green) 8 Hz flash when input is 110% of full scale range
    4 Hz flash when input is 10% below full scale range
    Humidity (Non-Condensing) Operating: 15 to 95% at 113°F (45°C)
    Soak: 90% for 24 hours at 149°F (65°C)
    Temperature Range Operating: 32 to 131°F (0 to 55°C)
    Storage: -13 to 158°F (-25 to 70°C)
    Wire Terminations Screw terminals for 12 to 22 AWG
    EMC Compliance (CE Mark) Emmissions: EN50081-1
    Immunity: EN50082-2
    Safety: EN50178
    Agency Approvals UL recognized per standard UL508 (File No.E99775)
    CE compliance per EMC directive 89/336/EEC and low voltage 73/23/EEC
    RoHS Compliant
    Power Consumption: 1.5 W typical, 2.5 W maximum
    Range: 9 to 30 V DC
    Dimensions 3.54 x 4.34 x 0.5" (90 x 110.2 x 12.6 mm)
    Weight 0.48 lbs (0.21 kg)

    Click here for complete specifications on the Eurotherm G468-0001.V1

  • Included ➕➖

    • What's included with the Eurotherm G468-0001.V1

    • Eurotherm ULTRA SLIMPAK AC Input Field Configurable Isolator, 4 to 20 mA, 0 to 500 V AC
  • Resources ➕➖

    • datasheet for the Eurotherm ULTRA SLIMPAK AC Input Field Configurable Isolator, 4 to 20 mA, 0 to 500 V AC

  • Forum ➕➖

    • Ask a question about Eurotherm ULTRA SLIMPAK AC Input Field Configurable Isolator, 4 to 20 mA, 0 to 500 V AC

  • Customer Reviews ➕➖

    • Customer Reviews for the Eurotherm G468-0001.V1

    More Eurotherm Products

    Eurotherm ULTRA SLIMPAK AC Input Field Configurable Isolator, 4 to 20 mA, 0 to 500 V AC (2024)
    Top Articles
    Willkommen bei UniqueBeds Home & Living, Ihrem Online-Wohnuniversum
    Spring Table Decor: How to Style for the Season | Acampora Interiors
    Water Cooler Topics & Conversations – UPDATED 2021
    Official OBR Watercooler GIANTS@BROWNS Pregame/Game Thread
    Latest Posts
    18 Backyard Ideas on a Budget - Trendey
    5 Clever Early Spring Table Decor Ideas
    Article information

    Author: Pres. Carey Rath

    Last Updated:

    Views: 5936

    Rating: 4 / 5 (41 voted)

    Reviews: 88% of readers found this page helpful

    Author information

    Name: Pres. Carey Rath

    Birthday: 1997-03-06

    Address: 14955 Ledner Trail, East Rodrickfort, NE 85127-8369

    Phone: +18682428114917

    Job: National Technology Representative

    Hobby: Sand art, Drama, Web surfing, Cycling, Brazilian jiu-jitsu, Leather crafting, Creative writing

    Introduction: My name is Pres. Carey Rath, I am a faithful, funny, vast, joyous, lively, brave, glamorous person who loves writing and wants to share my knowledge and understanding with you.